Product Catalogue

Patio & Garden

Path and Patio Sealer

Path and Patio Sealer - Non-colouring, anti-stain and water-proofing treatment for porous stone, brick and concrete.Non-colouring, anti-stain and water-proofing treatment for porous stone, brick and concrete.

Download Product Information Sheet


Liberon Path and Patio Sealer is a highly effective sealer that repels water and resists stains, food oils and barbeque marks. It is ideal for use on new or old stone, terracotta, brick, tile and concrete and can also be used on chimineas. The non-colouring formula means there is no change to the look of the stone and it is effective after just one coat on most surfaces.




How to use

Ensure the surface is clean and dry. Clean with Liberon Path and Patio Cleaner if required.

Apply Path and Patio Sealer generously with a paint brush and allow to dry for 24 hours. To check the surface is properly sealed drop a small amount of water onto the surface. Leave for 10-15 minutes and if the water remains on the surface then enough sealer has been applied. If not then further coats of sealer are required.
Repeat application and testing until the surface is properly sealed. The number of coats required will depend upon the porosity of the stone.

Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.

Cleaning and maintenance
Clean with Liberon Path and Patio Cleaner as and when required. Carry out the water drop test once a year and re-apply sealer as necessary.


1 L = +-10-12m² - depending on porosity

Pack Size
1L and 5L

Drying Time
1 hour to touch 24 hours final

You can always download our full Product Catalogue

Catalogue is a comprehensive 20mb PDF download.

Liberon Products (Australia) - PO BOX 306 EUMUNDI QLD 4562 - p 07 5471 1028 - f 07 3103 4201 designed and maintained by in2itive - XHTML 1.0 - CSS