Liberon

Product Catalogue

Furniture

Varnish Finishes

Kitchen and Bathroom Varnish

Kitchen and Bathroom Varnish - Specially formulated, water based varnish that is resistant to both water and high temperatures.Specially formulated, water based varnish that is resistant to both water and high temperatures.

Download Product Information Sheet

Purpose

Liberon Kitchen and Bathroom Varnish is a specially formulated, water based varnish for wet and humid rooms. Resistant to both water and high temperatures it is ideal for kitchen work surfaces or for wooden bathroom furniture.
Suitable for use on most types of wood, European and exotic, it is ideal for surfaces which undergo heavy domestic usage and its non-drip, quick drying formula means it is touch dry in 30 minutes.

Performance

How to use

Preparation
Ensure the surface is bare, clean and dry.
Bare wood: for greater protection timber may be treated with an interior wood treatment before varnishing.
Varnished wood: sand carefully with fine grade (240) sand paper. If the varnish is flaking strip with Liberon Fine Wood Stripper, neutralise with Liberon Wax and Polish Remover or white spirit. Allow to dry for 24 hours. Sand and remove all dust.
Painted wood: strip with Liberon Fine Wood Stripper. Neutralise with Liberon Wax and Polish Remover or white spirit. Allow to dry for 24 hours. Sand and remove all dust.
Waxed wood: remove wax finishes with Liberon Wax and Polish Remover. Sand and remove all dust. If you want to colour the wood you can apply Liberon Palette Wood Dye to the timber before varnishing. Alternatively Liberon Palette Wood Dye may be added to the varnish to create unique colour tones. Liberon Palette Wood Dye is available in a range of wood shades.

Application
Stir well before use. Apply two, or more coats if required, with a paint brush or spray gun (diluted with 10% water) to clean and dry wood. Allow the first coat to dry for 3 hours before sanding lightly with a fine grade sand paper (240), then remove all dust before applying further coats. Ideal conditions for application are between 12°C and 25°C when dry.

Important
Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.

Cleaning and maintenance
Wipe any spills. If the surface is extremely dirty mild household cleaners may be used to remove any stains. If the surface shows signs of wear re-apply a coat of varnish.

Precautions

 

 

Colours
Clear satin

Coverage
1L = 10-12m²

Pack Size
1L

Drying Time
Minimum 3 hours

You can always download our full Product Catalogue

Catalogue is a comprehensive 20mb PDF download.

Liberon Products (Australia) - PO BOX 306 EUMUNDI QLD 4562 - p 07 5471 1028 - f 07 3103 4201

liberon.com.au designed and maintained by in2itive - XHTML 1.0 - CSS